|
|
|
|
| |
|
|
| |
 |
FULL
DESCRIPTION |
|
| |
|
|
| |
The SPP-100 provides an IEEE-1284 parallel port. It can be used in any laptop
or notebook computer with a Type II PCMCIA drive or in a desktop computer equipped
with a compatible PCMCIA drive.
The SPP-100 fully supports the IEEE 1284 standard for high speed EPP (Enhanced
Parallel Port) communication. As well as EPP mode, the SPP-100 can also function
in standard unidirectional parallel port mode, and in bidirectional parallel
port mode. The built-in parallel port on many portable computers cannot function
in EPP mode, and the SPP-100 is an ideal choice in these situations when a high
speed parallel interface is required.
The SPP-100 will be assigned to the lowest LPT port available by default. However,
users may select the particular LPT port to which the SPP-100 is assigned. Base
address and interrupt level are also selectable. In addition, the SPP-100 may
be configured as a nonstandard device at any I/O base address and IRQ level
without being assigned to a LPT port. Standard resources for the SPP-100 are
I/O base address 278h and IRQ5 and I/O base address 378h and IRQ7. Any other
resource allocation constitutes nonstandard addressing.
Software is included to install and configure the SPP-100 for use with Windows 95/98/Me/NT/2000/XP/CE and OS/2. Special software drivers for HP Palmtop users
an be downloaded from this site. The card includes an interface cable which
provides a standard 25-pin female connector output. |
|
| |
|
|
|
| |
|
ACCESSORIES |
|
TYPE |
PART
NUMBER |
DESCRIPTION |
PRICE |
|
Cable |
|
Spare cable for SPP-100 (DB-25 M) |
$30.00 |
|
| |
|
| |
|
