8518R This item is no longer available.

Hardware Specifications:

• • Analog Input:
    • Input Channels: 8 differential
    • Input type : +/-15mV, +/-50mV, +/-100mV, +/-500mV, +/-1V, +/-2.5V, +/-20mA (requires optional external 125 ohm resistor), Thermocouple)
    • Thermocouple Type: J, K, T, E, R, S, B, N, C, L, M
    • Resolution: 16 bit
    • Sampling Rate of Module: 10 Samples/1 Second
    • Accuracy: ±0.1%
    • Bandwidth: 15.7Hz
    • Zero Drift: +/- 10µV/°C
    • Span Drift: ±25ppm/°C
    • Common Mode Rejection @50/60Hz: 86dB min
    • Normal Mode Rejection @ 50/60Hz: 100dB
    • Input Impedance: Voltage: >400k O
    • Over Voltage Protection: 240 Vrms
    • Open Thermocouple Detection: Yes
    • ESD Protection: +/-4kV (Contact for each channel)
    • Intra-Module Isolation: 3000VDC
  • Interface:
    • RS-485
    • Format: N,8,1
    • Baud Rate: 1200 ~ 115200 bps
    • Connections: Terminal blocks (accepts 16-22 AWG wires)
  • LED Display:
    • 1 LED as Power/Communication Indicator
  • Power:
    • Input Voltage Range: +10 to +30V DC
    • Power Consumption: 1.8W
  • Environment:
    • Operating Temperature: -13 to 167°F (-25 to 75°C)
    • Storage Temperature: -40 to 185°F (-40 to 85°C)
    • Humidity: 5 to 95% RH, non-condensing

Thermocouple Type

Software Specifications:

• • Hardware Requirements:
    • One 8000 Series Analog Input Module Connected via USB or RS232
    • 512MB RAM
    • 6MB Hard Disk Space (For WINview CP 2012 Only - Additional Space Required for Data Storage and/or .NET Framework)
  • Software Requirements
    • Windows XP (Service Pack 3), Windows Vista or Windows 7 (32-bit or 64-bit)
    • Microsoft .NET Framework Version 4.0 or Higher
    • 1024 x 768 Resolution or Higher
    • Requires Administrator User Privileges
  • General Software Specifications:
    • Maximum Number of Inputs:
      • Number and Type of Channels Determined by Module Used
    • Supported Signal Types:
      • All Analog Input Types:
        • Volts, mV, mA, Thermocouple, RTD, Strain Gauge, etc.
    • Ease of Use:
      • Very Easy, No Learning Curve, No Programming, No Manual Needed
    • Speed of Acquisition:
      • Maximum: 10 Hz (May be Limited by Hardware)
      • Minimum: None
    • Duration of Acquisition:
      • Finite (Specify Number of Points to Collect)
      • Continuous (Collects Until Stopped by User)
    • Data Storage:
      • Stream Data to Disk as ASCII Text (Tab Delimited)
      • Stream Data to Disk as ASCII Text with Time/Date Stamp Options (Tab Delimited)
      • Easily Import into Microsoft Excel
    • Settings Retrieval
      • All User Settings May Be Saved to a File for Later Use
      • Selectable Auto-Load of Specified Settings File
    • Math Formulas Per Channel:
      • Yes
      • Supports the Following Math Functions: +, -, *, /, ( ), sin, cos, tan, ^, ln, sqr, exp
    • Real-Time Display:
      • Yes, Selectable Graphing Options
  • Graph Specifications:
    • Display:
      • Time vs. Y
      • Multiple Channels per Graph
      • Digital Readout of Each Channel
      • Strip-Chart Mode
      • User Selectable Graph Type (Line, Bar, Pie, etc.)
  • • X-Axis:
      • Samples, Seconds, Minutes, Hours, Days
      • Supports Auto-Scaling
    • Y-Axis:
      • User-Defineable
      • Supports Auto-Scaling
    • Graph Functions:
      • Print Graph Image
      • Save Graph Image
      • Zoom Graph Image
      • Copy Graph Image to Clipboard
    • Trigger Type:
      • Software Push Button